625 HF SERIES HIGH FLOW
All Elements Are 5 Layer Construction For Maximum Pleat Support And Dirt Loading.
Everything has to be a good fit: the quality, the price points, the customer service, the marketing support and the company’s vision for the line going forward.
We offer the highest grade, 90% and 99.98% efficient elements on the market today.
- Our media is manufactured in-house under strict guidelines to ensure consistency and maximum dirt loading
- In-house lamination and calendaring of our medias allow us to control the final media grades
- Complete in-house testing with a Capillary Flow Porometer guarantees a superior and consistent product
- With 8 micron ratings and multiple lengths and 4 end cap configuration to ensure we produce the element you require
- Elements have thermally bonded end caps and ultrasonic welded media seams for a one piece construction
- Final, one piece construction up to 40” long ensures zero bypass
- We install the maximum amount of media in each filter without pleat binding for increased dirt loading capacity
- Elements are 100% polypropylene—media, inner and outer supports mesh and end caps
- Elements meet FDA Title 21 regulations for food and water contact
- Cartridges are constructed in a clean room environment
- Cartridges may be ordered as final rinsed with 18 mega ohm water
- We offer inside out OR outside in flow pattern for your specific housing application.
- Longer service life equals reduced maintenance and downtime
| Filters Media : | Polypropylene Melt Blown |
| Core: | Polypropylene |
| Netted Outer Cage | Polypropylene |
| Support Material | Polypropylene |
| Gaskets/O-rings: | Buna-n,viton (R),Teflon (R),Silicone,Neoprene,EPDM |
| Sealing: | Thermal Bond |
FDA Listed Materials
| Manufactured from materials which are FDA listed for food contact applications in Title 21 of the US code of federal regulations |
Performance specifications
| Retention ratings of 90% and 99.98% at:.5,1,3,5,10,25,50&100 micron |
| Operating Conditions | Purity |
|---|---|
| Maximum Differential pressure 50 psid@ 180F(82c) | Cartridges are Free of Surfactants, Resins, Binders and Adhesives |
| Toxicity | Sterilization |
|---|---|
| These catrideges are manufactures with no additives or other manufacturing agents.We gurantee all materials used in the producation meet FDA Title 21 of the code of Federal Regulations 174.5 and 177.1520 | Multiple Autoclaving for 30 minutes at 250F(121c) under no end load conditions . In-line stream sterilization is not recommended.May be In-line Sanitized with hot water at 180F(82c) for 1 hour |
| Dimensions (Nominal) | |
|---|---|
| Outside Diameter: | 6.25″ |
| Lengths: | 20″,30″,39″,40″,60″ & 80″ |
| 625 High Flow Pleated Cartridge | Media | Efficiency | Micron | Cartridge Length | End Cap | Gasket / O-Ring | 18 Mega Ohm Rinse |
|---|---|---|---|---|---|---|---|
| 625 | E | A | 1 | 5 | 3 | B | R |
| 625 | Polypropylene (E) | 90% A | 5 | 5=20 | 222/Flat (4) | Buna (B) | R |
| 99.88 %(B) | 1 | 7=30 | 226/Flat (5) | Viton® (V) | |||
| 3 | 8=39 | 225/Flat (6) | Teflon® (T) | ||||
| 5 | 9=40 | Flat/O-ring(9) | Silicone (S) | ||||
| 10 | 10=60 | Custom (A)) | Neoprene(N) | ||||
| 25 | 11=80 | EPDM(D) | |||||
| 50 | A=Custom | ||||||
| 100 |