STANDARD EFFICIENCY PLEATED CARTRIDGES
H & HN Series In 2 Efficiency Grades, Offer The Ultimate In High-End Filtration
Everything has to be a good fit: the quality, the price points,
the customer service, the marketing support and the company’s vision for the line going forward.
Product Information
- Pnucor’s standard efficiency pleated cartridges are manufactured in-house with 2 grades of media— polypropylene and polyester
- In-house lamination and calendaring of our medias allow us to control the final media grades
- Complete in-house testing guarantees a superior and consistent product
- With 6 micron ratings, 2 standard diameters and 8 standard lengths we are sure to produce the element you require
- Because we produce our own molds for the PVC end caps, custom sizes and applications are welcomed
- All seams are 100% ultrasonically welded to ensure zero bypass
- Standard diameters are 2.5 and 4.5 inches
- Standard lengths up to 40 inches
- We place a maximum amount of media in each filter without pleat binding for increased dirt holding capacity
- Polypropylene elements with polypropylene cores meet FDA Title 21 regulations for food and water contact
PRODUCT SPECIFICATIONS
| MATERIALS OF CONSTRUCTION | DIMENSIONS (NOMINAL) | ||
|---|---|---|---|
| Filter Media: | Polypropylene Melt Blown or Polyester | Outside Diameter: | 2.5″ & 4.5″ |
| Sealing: | Thermal Bond | Lengths: | 9.75″, 10″, 19.5″, 20″, 29.25″, 30″, 39″ & 40″ |
| SURFACE AREA | PERFORMANCE SPECIFICATIONS | ||
| Up to 5.5ft2 (.23m2) of Effective Filtration Area per 10″ equivalent, dependent upon micron rating | Retention Ratings: 1, 5, 10, 20, 30 & 40 micron | ||
| OPERATING CONDITIONS | FDA LISTED MATERIALS | ||
| Maximum Differential Pressure: 35 psid @ 120°F (49°C) | Manufactured from materials which are FDA listed for food contact applications in Title 21 of the U.S. code of federal regulations | ||
Build a Product Number
| STANDARD EFFICIENCY PLEATED CARTRIDGE | MEDIA | CORE | CARTRIDGE DIAMETER | MICRON | CARTRIDGE LENGTH | END CAP |
|---|---|---|---|---|---|---|
| S | E | E | S | 1 | 5 | 1 |
| S | E = Polypropylene C = Polyester | E = Polypropylene C = Custom | S = 2.5″ standard M = 4.5″ C = Custom | 1 5 10 20 30 40 | 2 = 9.75 3 = 10 4 = 19.5 5 = 20 6 = 29.5 7 = 30 8 = 39 9 = 40 | 1 = DOE/plastisol A = Custom |